눈꽃빙수기 프리미엄 스노우반 공식 홈페이지

SNOWVAN Compare honest SNOWVAN with other companies products.

		Other company products
	-50℃ Efficient Drum Thickness (0.5T) - Only in Korea Maintains cooling temperature even after prolonged operation	Average of minus 30 degrees Thick dream Cooling temperature unstable during prolonged operation
Cooling power	Production time and output depend on cooling temperature. Unstable cooling temperature leads to an imbalance in ice quality
	Best production compared to size (small size) Daily production of 300 kg or more Production of 200 ml milk per serving (reference video) Production available 24 hours in a row	Small size Daily production volume 100 kg or less Large size Daily production volume 200–250 kg Suspension or ice change due to overload during prolonged operation
Production	False, hype-cautious, unedited footage is essential.
Drum	Drum width 8cm Drum rotational speed increase (production up) with excellent rapid cooling Ice flakes can be received immediately in the ice flakes container, so it is hygienic to complete the ice flakes, no Ross.	Drum width 10 cm to 25 cm Narrow drums are under-produced at slow speeds (unsuitable for business use) Wide drums are unsanitary and lossy With Drum Speed Step Adjustment (minimal difference in ice quality by step
Drum	SNOWVAN the Little Giant! Small size makes it easier to use space and reduces operating noise.

OPERATORY (ONE-TOUCH)	Simple and convenient one-button switch method (mechanical) Start immediately > Stop immediately > Restart immediately (0 seconds latency) Test at least 10,000 times a day before shipment	Touch method with PCB main board (electronic) Requires braking time or waiting time for immediate restart Frequent AS due to poor connection An uncomfortable way to touch and hold for a few seconds, depending on the function.
OPERATORY (ONE-TOUCH)	It has been developed with a mechanical switch button after boldly removing the electronic control function that is frequently broken.
Ross rate	Ultra-adhesive structure under drum with injection mold fabrication Very little is left in the raw material container or raw material plate (within 3 ml) No cleaning required for other undiluted solution conversions	Made off the shelf Large amount left in the raw material plate (approximately 80 ml) Loss of material costs and required time for cleaning
Ross rate	SNOWVAN accessories are made of injection molds, and most other companies use ready-made products.
Compressor	Only 70% of horsepower capacity runs reliably Specialized compressor for SNOWVAN without pressure rise	braking time or waiting time is required due to high gas pressure difference when immediately stopping
Compressor	The driving force behind intuitive operation is one of the advantages of many customers.

Water-saving	High-quality, high-performance water-saving toilet developed and produced for snow van shaved ice Even the fine flow rate is adjusted according to the situation. Optimal minimum amount of cooling water / No strain on compressor/ Constant cooling and ice retention. / Reducing Water Charges	Accurate verification is required for machines with no water saving or newly installed machines
Water-saving	SNOWVAN and other companies products! There is a difference between the amount of cooling water drained and the heating on the side of the machine!
Cleaning	A simple and convenient structure that can be hand washed every corner. Drum Idle (Not Cooled) Development and launch of automatic drum washing device (optional function) Each accessory can be disassembled.	There are auto-cleaning function but incomplete and not hygienic. A structure that is difficult to clean hands due to narrow spaces such as accessories;
Cleaning	Automatic drum washing machine for drum washing busy hours.(hand washing is recommended when finishing)
exterior material	polycarbonate, stainless steel Polycarbonate is a hygienic and sturdy material that is heat-resistant, shock-resistant, and weather-resistant.	Stainless steel, plastic
exterior material	Strengthen durability by using two types of polycarbonate > tempered glass (approximately 150 times more impact)